1. 2016 Nissan Altima Owners Manual Download
2. Nissan Altima Owners Manual Same Time
3. 2013 Nissan Altima Owners Manual Online Free

CONTINUOUSLY VARIABLE TRANSMISSION (CVT) WARNING ● Do not depress the accelerator pedal while shifting from P (Park) or N (Neutral) to R (Reverse), D (Drive), Ds (Drive Sport) or manual shift mode (if so equipped). Always depress the brake pedal until shifting is completed. Failure to do so could cause you to lose control and have an accident.

● Cold engine idle speed is high, so use caution when shifting into a forward or reverse gear before the engine has warmed up. ● Do not downshift abruptly on slippery roads. This may cause a loss of control. ● Never shift to P (Park) or R (Reverse) while the vehicle is moving. This could cause an accident. CAUTION ● Except in an emergency, do not shift to the N (Neutral) position while driving.

Coasting with the transmission in the N (Neutral) position may cause serious damage to the transmission. ● When stopping the vehicle on an uphill grade, do not hold the vehicle by depressing the accelerator pedal. The foot brake should be used for this purpose. The CVT in your vehicle is electronically controlled to produce maximum power and smooth operation. The CVT can operate in two different automatic drive modes: ● D (Drive) mode - Move the shift lever to D (Drive), the transmission is in the normal forward automatic driving mode. The position indicator in the meter shows a “D”. The D (Drive) mode does not produce a gear change sensation like a traditional automatic transmission.

2004 Nissan Altima – PDF Owner's Manuals. Repair Manual - Automatic Transmission (Section AT).

• 2016 Nissan Altima Owners Manual [Nissan dealer] on Amazon.com. *FREE* shipping on qualifying offers. 2016 Nissan Altima Sedan Owners Manual.
• 2013 Nissan Altima Owners Manual – The Nissan Altima is all-new for 2013. With a combo of progressive mechanical elements, carefully.

● Ds (Drive Sport) mode - Move the shift lever from D (Drive) to the to Ds (Drive Sport). The position indicator in the meter shows a “Ds”. In Ds (Drive Sport) mode, transmission operation changes to Sporty” driving shift operation, creating a more aggressive acceleration feeling than the D (Drive) mode and a gear change sensation when the driver accelerates or when using the shift paddles (if so equipped). During Ds (Drive Sport) mode operation, the driver must move the shift lever from Ds mode to D mode and back again to re-select Ds (Drive Sport) mode.

2016 Nissan Altima Owners Manual Download

● To cancel the Ds mode, return the shift lever to the D (Drive) position. The transmission returns to the automatic drive mode. The CVT can operate in two manual drive modes: ● M (Manual) mode (if so equipped) - With the shift lever in the Ds (Drive Sport) mode, using the shift paddles (if so equipped) up (+) or down (–) produces noticeable upshifts and downshifts. The position indicator in the meter shows a “M”. ● To Ds (Drive Sport) mode return the shift lever to the D (Drive) mode. Follow these procedures for maximum vehicle performance and driving enjoyment. NOTE: Engine power may be automatically reduced to protect the CVT if the engine speed increases quickly when driving on slippery roads or while being tested on some dynamometers.

Starting the vehicle 1. After starting the engine, fully depress the foot brake pedal before moving the shift lever out of the P (Park) position. Keep the foot brake pedal depressed and move the shift lever into a driving gear. Release the foot brake, then gradually start the vehicle in motion. Service manual 1998 gmc envoy. Stop the vehicle completely before shifting the shift lever to the P (Park) position. The CVT is designed so the foot brake pedal MUST be depressed before shifting from P (Park) to any drive position while the ignition switch is in the ON position.

The shift lever cannot be moved out of P (Park) and into any of the other gear positions if the ignition switch is pushed to the LOCK position. To move the shift lever: Press the button A while depressing the brake pedal Press the button A to shift Shift without pressing button A Shifting After starting the engine, fully depress the brake pedal and move the shift lever from P (Park) to any of the desired shift positions. WARNING Apply the parking brake if the shift lever is in any position while the engine is not running. Failure to do so could cause the vehicle to move unexpectedly or roll away and result in serious personal injury or property damage. P (Park): CAUTION To prevent transmission damage, use the P (Park) or R (Reverse) position only when the vehicle is completely stopped.

Use the P (Park) shift lever position when the vehicle is parked or when starting the engine. Make sure the vehicle is completely stopped. The brake pedal should be depressed to move the shift lever from N (Neutral) or any drive position to P (Park). Apply the parking brake. When parking on a hill, apply the parking brake first, then move the shift lever into the P (Park) position. R (Reverse): CAUTION To prevent transmission damage, use the P (Park) or R (Reverse) position only when the vehicle is completely stopped.

Use the R (Reverse) position to back up. Make sure the vehicle is completely stopped before selecting the R (Reverse) position.

The brake pedal must be depressed to move the shift lever from P (Park), N (Neutral) or any drive position to R (Reverse). N (Neutral): Neither forward nor reverse gear is engaged. The engine can be started in this position. You may shift to N (Neutral) and restart a stalled engine while the vehicle is moving. D (Drive): Use this position for all normal forward driving. Ds (Drive Sport) (if so equipped): When the shift lever is shifted from the D (Drive) to Ds (Drive Sport) position, the transmission enters the Ds (Drive Sport) mode. Moving the shift lever to the Ds (Drive Sport) position allows you to enjoy “sporty” driving shift operation on a winding road and feel smooth acceleration or deceleration on a hilly road by moving in a lower gear automatically.

When canceling the DS mode, return the shift lever to the D (Drive) position. The transmission returns to the normal driving mode. Manual shift mode (if so equipped) When the shift lever is in the Ds (Drive Sport) position, the transmission is ready for the manual shift mode.

Shift ranges can be selected manually by pulling the right-side or left-side paddle shifter. When shifting up, pull the right side paddle shifter (+) C (if so equipped). The transmission shifts to the higher range. When shifting down, pull the left side paddle shifter ( ) B (if so equipped). The transmission shifts to the lower range. When canceling the manual shift mode, return the shift lever to the D (Drive) position. The transmission returns to the normal driving mode.

When you pull the paddle shifter (if so equipped) while in the D (Drive) position, the transmission will shift to the upper or lower range temporarily. The transmission will automatically return to the D (Drive) position after a short period of time. If you want to return to the D (Drive) position manually, pull and hold the paddle shifter for about 1.5 seconds. In the manual shift mode, the shift range is displayed on the position indicator in the meter.

Shift ranges up or down one by one as follows: 1⇔ 2 ⇔ 3 ⇔ 4 ⇔ 5 ⇔ 6 ⇔ 7 M7 (7th): Use this position for all normal forward driving at highway speeds. M6 (6th) and M5 (5th): Use this position when driving up long slopes, or for engine braking when driving down long slopes. M4 (4th), M3 (3rd) and M2 (2nd): Use for hill climbing or engine braking on downhill grades. M1 (First): Use this position when climbing steep hills slowly or driving slowly through deep snow, sand or mud, or for maximum engine braking on steep downhill grades.

● Remember not to drive at high speeds for extended periods of time in lower than 7 range. This reduces fuel economy. When shifting up: Move the shift lever to the + (up) side. (Shifts to higher range.) When shifting down: Move the shift lever to the (down) side. (Shifts to lower range.) ● Moving the shift lever rapidly to the same side twice will shift the ranges in succession. When canceling the manual shift mode: Return the shift lever to the D (Drive) position to return the transmission to the normal driving mode.

● In the manual shift mode, the transmission may not shift to the selected gear. This helps maintain driving performance and reduces the chance of vehicle damage or loss of control. ● In the manual shift mode, the transmission may shift up automatically to a higher range than selected if the engine speed is too high. When the vehicle speed decreases, the transmission automatically shifts down and shifts to 1st gear before the vehicle comes to a stop. ● CVT operation is limited to automatic drive mode when CVT fluid temperature is extremely low even if manual shift mode is selected. This is not a malfunction.

When CVT fluid warms up, manual mode can be selected. ● When the CVT fluid temperature is high, the shift range may upshift in lower rpm than usual. This is not a malfunction. Shift lock release If the battery charge is low or discharged, the shift lever may not be moved from the P (Park) position even with the brake pedal depressed and the shift lever button pushed. It will be necessary to jump start or have your battery charged, see “Jump starting” in the “In case of emergency” section. Contact your NISSAN dealer or a professional towing service.

To move the shift lever, complete the following procedure: 1. Push the ignition switch to the LOCK position. Apply the parking brake. Using a protective cloth on the tip of a 3 mm screwdriver, remove the shift lock release cover. ● If available, a plastic trim tool can also be used. Insert the small screwdriver in the shift lock release slot and push down. Move the shift lever to the N (Neutral) position while holding down the shift lock release.

If the shift lever cannot be moved out of P (Park), have a NISSAN dealer check the transmission as soon as possible. WARNING If the shift lever cannot be moved from the P (Park) position while the engine is running and the brake pedal is depressed, the stop lights may not work. Malfunctioning stop lights could cause an accident injuring yourself and others. Overdrive (O/D) OFF switch (if so equipped) When the O/D OFF switch is pushed with the shift lever in the D (Drive) position, the light in the instrument panel illuminates.

See “Overdrive off indicator light” in the “Instruments and controls” section of this manual. Use the Overdrive off mode when you need improved engine braking. To turn off the Overdrive off mode, push the O/D OFF switch again. The indicator light will turn off. Each time the engine is started, or when the shift lever is shifted to any position other than D (Drive), the Overdrive off mode will be automatically turned off. Accelerator downshift — in D position — For passing or hill climbing, depress the accelerator pedal to the floor.

This shifts the transmission down into a lower gear, depending on the vehicle speed. High fluid temperature protection mode This transmission has a high fluid temperature protection mode. If the fluid temperature becomes too high (for example, when climbing steep grades in high temperatures with heavy loads, such as when towing a trailer), engine power and, under some conditions, vehicle speed will be decreased automatically to reduce the chance of transmission damage.

Vehicle speed can be controlled with the accelerator pedal, but the engine and vehicle speed may be limited. Fail-safe If the vehicle is driven under extreme conditions, such as excessive wheel spinning and subsequent hard braking, the fail-safe system may be activated. The MIL may come on to indicate the fail-safe mode is activated, see “Malfunction Indicator Light (MIL)” in the “Instrument and controls” section. This will occur even if all electrical circuits are functioning properly.

In this case, place the ignition switch in the OFF position and wait for 10 seconds. Then push the switch back to the ON position.

The vehicle should return to its normal operating condition. If it does not return to its normal operating condition, have a NISSAN dealer check the transmission and repair if necessary. WARNING When the high fluid temperature protection mode or fail-safe operation occurs, vehicle speed may be gradually reduced. The reduced speed may be lower than other traffic, which could increase the chance of a collision. Be especially careful when driving. If necessary, pull to the side of the road at a safe place and allow the transmission to return to normal operation, or have it repaired if necessary. To engage, firmly depress the foot brake.

To release: ● Move the shift lever to the P (Park) position. ● Firmly depress the parking brake pedal and it will release.

● Before driving, be sure the brake warning light goes out. Other materials: Removal and Installation TRUNK ROOM LAMP Removal 1. Disconnect the negative battery terminal. Release the tab (A), then swing open the lens. Remove the bulb (3).

Release the tab (B), then pull trunk room lamp (2) away from body opening. Disconnect the connector (1) and re. Work Flow OVERALL SEQUENCE.1 SRC-12, 'Trouble Diagnosis Introduction' Introduction'.2 SRC-12, 'SRS Operation Check'.3 SRC-5, 'Trouble Diagnosis with CONSULT-III'.4 SRC-14, 'Self-Diagnosis Function (Without CONSULT-III)' DETAILED WORK FLOW. Description Refer to AV-240, 'System Description'. DTC Logic DTC DETECTION LOGIC Diagnosis Procedure 1.CHECK DVD-ROM Check DVD-ROM for dirt, scratches and warpage.

Nissan Altima Owners Manual Same Time

Is the DVD-ROM clean and undamaged? YES Replace AV control unit.

2013 Nissan Altima Owners Manual Online Free

Refer to AV-437, 'Removal and.

2018 Nissan Altima Owners Manual PDF download manual PDF 2018 Nissan Altima 2018 Nissan Altima Owners Manual 467 pages 2018 Nissan Altima Navigation Manual 263 pages 2018 Nissan Altima Quick Reference Guide 40 pages 2018 Nissan Altima manual – One of the features that become attention is the presence of ProPilot will Assist as optional features on the car. ProPilot Assists is a semi-autonomous vehicles feature that can control the direction of the car, accelerates and brakes on the highway. However this feature is still not entirely autonomous due to human intervention is still very important. The driver should pay attention to the road and keep your hands on the circumference of the wheel because the car is still maneuvering capability is limited. To overcome some of the bend for example, this feature still has its own limitations. Therefore, the driver must exert its ability so that the car can turn more easily than relying on features of ProPilot.